Correct usage of lithium batteries.48v lithium golf cart battery

　　But if lithium batteries are produced and sold by legitimate merchants and manufacturers, they are strictly tested and certified before leaving the factory. This type of lithium battery is generally not a problem, but if it is used improperly by the customer, it will have an impact on the performance and lifespan of the lithium battery, and in severe cases, it may even be damaged. So, the correct use of lithium batteries is very important!

　　Let's take a look at how to use lithium batteries to make them safer, more durable, and have a longer lifespan? What problems will arise with newly purchased lithium batteries? What do we need to pay attention to? With these questions to answer, I also hope to help everyone use lithium batteries correctly.

　　1. Should the newly purchased lithium battery be charged or discharged first, and how should it be charged and discharged?

　　First, perform low current discharge (usually set to 1-2A), and then use 1A current to charge and discharge for 2-3 cycles to activate the battery.

　　2. The new battery has just started using, but the voltage is unbalanced. After charging and discharging several times, it returns to normal. What is the reason?

　　Although there is no problem with the pairing of individual cells in the battery pack, there may still be individual differences in self discharge. A new battery usually takes more than 3 months from the factory to the customer's hands, during which the individual cells may exhibit different voltages due to different self discharge, resulting in a larger voltage difference (i.e. imbalance) in the battery pack.

　　3. In what environment is lithium battery stored?

　　Store in a cool and dry environment, at a room temperature of 15-35 ℃ and an ambient humidity of 65%

Read recommendations:

lifepo4 24v wholesaler

12v 200ah

51.2V 26Ah LiFePO4 Battery for Electric Motorcycles Scooter Tricycle Rickshaw

Introduction to lithium ion battery.12v 100ah lithium ion battery

Why should we improve the ion conductivity of polymer battery electrolytes?