How long does it take to charge nickel -hydride batteries?dual purpose marine battery

　　Generally speaking, the first charging time for the new nickel -hydride battery is relatively long. And for the better recycling of batteries, it is necessary to ensure the principle of full use. Memory effects still exist for nickel -hydride batteries. If it is not used properly, it will still cause capacity loss. Therefore, the use of nickel -metalized batteries should be completed and then charged, and it is generally charging for a long time in the first three times when it starts, about 12h each time.

　　Many nickel -metal hydride batteries on the market, such as the more famous Nanfu battery (cylindrical), are nickel -metal hydride batteries. These batteries generally charging more than 10 hours, and the fastest also takes about 8 to 9 hours. And because nickel -metalized batteries have memory effects, you need to pay special attention to the problem of complete filling of the battery. Otherwise, it has a great impact on the life of the battery. So how do you depend on the charging time of the nickel -metalized battery?

　　Seeing the charging time of the nickel -metal hydride battery needs to see four aspects, one is how big the nominal capacity of the battery itself; the other is how many batteries need to be charged at the same time; the third is how the current can be output in this article. ; The fourth is to see if the cycle on the battery itself is completely discharged. The corresponding charging time can be obtained according to the charging formula corresponding to the nickel -metalized battery. The following is the charging formula for the nickel -metalized battery.

　　The time required for charging = battery capacity (MAH/AH) × charging coefficient (1.4) ÷ charging current (MA/A).

Read recommendations:

solar powered generator for home

12 volt batteries

Home Energy Storage System 51.2V 150Ah LiFePo4 Battery Pack

How long does it take to charge nickel -hydride batteries?dual purpose marine battery

How to maximize the capacity efficiency of the battery pack?