What is UPS power supply?marine battery for trolling motor

　　UPS is an important external device that can provide continuous power supply that can provide continuous, stable, and uninterrupted power supply. The battery is connected to the host, and the DC power is converted into a municipal system system through module circuits such as inverters. It is mainly used to provide stable and uninterrupted power supply for computers, computer network systems or other power electronics equipment. It mainly plays two roles: one is emergency use to prevent sudden power off and affect normal work, and cause damage to the computer; the other is to eliminate the surging of the city's electricity, instantaneous high voltage, instant low voltage, wire noise and frequency offset offset offset. Wait for "power pollution" to improve the quality of power supply and provide high -quality power supply for computer systems.

　　The working principle of the uninterrupted power supply UPS is actually very simple, that is, through the city electricity, and then charging the battery that we prepare in advance, and then power the inverter through this battery to achieve a electricity disconnection in the city. Can automatically supply power.

　　1. Regularly maintain the UPS power supply: remove the dust in the machine, measure the voltage of the battery pack, replace the unqualified battery, check the operation of the fan, and detect the system parameters of the UPS.

　　2. It is forbidden to use overload.

　　3. It is forbidden to turn on and turn on the UPS power supply frequently. Generally, it is required to turn on the UPS power after at least 6 seconds after the UPS power supply is turned off. Electric output, there is no inverse output state.

　　4. When using the UPS power supply, you should abide by the relevant provisions of the manufacturer's product manual to ensure the connected lines, zero lines, and ground wires meet the requirements. Users must not change their order at will.

　　5. The place where the UPS power supply should be avoided, and there is enough ventilation space to avoid direct sunlight. At the same time, it is forbidden to connect a emotional load on the UPS output port.

　　6. Strictly follow the correct boot and shutdown order to avoid when the load is suddenly added or reduced by the load, the voltage output of the UPS power supply fluctuates large, and the UPS power supply cannot work properly.

Read recommendations:

best batteries for solar power storage

solar battery system

18650 21700 26650 10C 15C 20C Lithium Ion Battery Cell

Important factors affecting internal resistance of battery

What is the difference between battery and lithium batteries?lithium batteries for solar panels Vendor