source:other news
    release time:2023-03-21
    Hits:0     
    Popular:

1. The battery should be stored in a cool environment. When the battery is stored for a long time (more than 3 hours);
2. It is recommended to place it in an environment where the temperature is 10-20 ° C and the low temperature without corrosive gases. The battery is charged every 3 months to maintain the battery activity during the long-term storage of the battery, and ensure that each battery voltage is 3.7V at 3.7V ~ 3.9V range.
FPV scrap battery treatment
If there is the following situations, it means that your battery has already had problems, and it is recommended to deal with it properly.
Appearance judgment: obvious swelling, damage, leakage, deformation;
Voltage judgment: battery voltage ≥4.27, (non -high -voltage formula) or less than 2.75V;
Internal resistance judgment: endless battery resistance (not tested), or more than twice the initial internal resistance;
Capacity judgment: The capacity of two consecutive discharge is less than 70%of the nominal capacity;
The following is the processing method of FPV scrap battery:
1. Isolation logo: The battery that has been determined as scrap must be clearly identified and stored separately. It is strictly forbidden to recharge or charging. The temporary storage location needs to meet the fire prevention requirements, such as iron cabinets, iron barrels, etc.;
2. Soak salt water: According to the proportion of salt water 1:20, use wide -mouth containers (such as weekly turning baskets, iron barrels, etc.), placed on the empty outdoor (not easy to ignite and explosive items), soake the battery in salt water without salt water In 2 hours, you must not exceed 3 groups at a time;
3. After soaking the wreckage with fire tongs, confirm that there is no voltage or no longer fever, it can be treated with general solid waste;
Read recommendations:
marine battery for trolling motor
Smart Home Device Lipo Battery Cell Pack 3.7V
Exploring the Eco 36 Volt Lithium Battery: A Comprehensive Review
electromotive force.portable power station with solar panel
 
	Last article:FPV battery charging.marine battery for trolling motor Processing
Next article:The cause of the failure of lithium iron phosphate battery production process.lithium ion golf cart batteries Processing
related suggestion
solar power storage manufacturer
2023-03-20lifepo4 solar battery manufacturer
2023-04-07lithium ion golf cart batteries wholesale
2023-03-22lithium deep cycle marine battery wholesale
2023-03-22lifepo4 solar battery Processor
2023-04-07solar power storage wholesaler
2023-03-20solar power station
2023-05-08best solar powered generator
2023-05-08solar generator for home
2023-05-08best portable solar generator
2023-05-08solar battery storage system cost
2023-05-0812v 200ah battery
2023-05-08HB-N1000 1000W Solar Portable Power Station with AC 100V-240V
2022-09-2914650 Lithium Ion Battery for Electric Toothbrush
2023-02-14LiFePo4 Battery Pack 12V 350Ah
2022-09-1976.8V 26Ah LiFePO4 Battery for Electric Motorcycles Scooter Tricycle Rickshaw
2025-05-2112V Rechargeable Lithium Ion 18650 Battery Pack 2000mAh
2023-02-1421700 vs 26650 Lithium-Ion Batteries: A Comparative Analysis for Optimal Performance
2025-03-19Main performance indicators of lithium ion batteries.lithium deep cycle marine battery Vendor
2023-04-24HYSINCERE to Exhibit at RE+ 2025 in Las Vegas
2025-07-09Graphene-Enhanced Solid State Batteries: The Next Breakthrough in Commercial Energy Storage
2025-05-23The Future of Portable Power: Lithium Polymer Battery Manufacturing
2025-03-22How to measure the quality of the positive electrode material of lithium -ion batteries?
2022-10-21How to make hearing aid batteries lasting for a long time?
2023-02-08What causes lithium batteries to overheat?
2022-10-28Nickel hydrogen battery
2022-12-05Where does the lithium iron phosphate battery need routine maintenance?
2022-11-18