FPV battery charging.marine battery for trolling motor Processing

　　1. For lithium batteries, the voltage is generally 4.2V (high voltage 4.3V) after full fullness, and the battery capacity is based on MAH (Mianho).

　　2. The voltage is higher than 4.2V (high voltage 4.3V), and the internal chemical reaction is too intense. The lithium battery will swell and expand. If it continues to charge, it will swell and burn. Whether it is too much or over -charging, it will cause great damage to the model of the model \ FPV.

　　3. The charging current must not exceed the maximum charging current specified in the specification book. We recommend (0.5 ~ 1.0C charging). The modeling \ FPV battery can support 3C-5C charging; The issue of mechanical performance and safety performance may cause fever or leakage.

　　4. The charging voltage shall not exceed the specified restricted voltage (4.2V/single battery), and 4.25V is the highest limit of each charging voltage. (Direct charging is strictly prohibited, otherwise the battery cell may be charged, and the consequences of the user due to the wrong use of the battery). (High pressure 4.3V)

　　5. The battery must be charged within the environmental temperature range specified in the product specification book, otherwise the battery will be easily damaged. The positive and negative pole of the battery is correctly connected, and the direction is strictly prohibited. If the positive and negative poles are connected, the battery will not be charged. The direction charging will damage the battery, and even cause heat, leakage, and fire.

Read recommendations:

lifepo4 battery 12v company

lifepo4 battery 12v 200ah

60V 80Ah Motive Battery Pack for AGV Robot

What are the knowledge introductions in the use of lithium batteries?best batteries for solar power storage

What parameters should I consider for lithium battery design?best solar generator for home backup