Collagen battery electrolyte adsorption technology.lithium batteries for solar panels price

　　The colloid battery uses colloid adsorption technology:

　　(1) The inside is gel electrolyte, without free electrolyte.

　　(2) The electrolyte is about 20%of the capacity, so it is still very reliable when it is high -temperature operation or excessive charging, and the battery will not produce a "dry" phenomenon. The height of the battery is wide.

　　(3) The upper and lower concentrations of colloidic electrolytes are consistent, and it will not produce acid layers. Therefore, the response is uniform. Under the condition of high magnification discharge, the polar plate will not be deformed and the internal circuit will be caused.

　　(4) The proportion of acid liquid is low, (1.24), and the corrosion of the pole plate itself is relatively low

　　The lead -acid battery uses glass wool adsorption technology:

　　(1) The acid liquid is absorbed in the glass dimension, and a large number of free electrolyte exists. It is likely to leak in the case of strong charging.

　　(2) Electrolytic liquid portion ratioIt is less than 20%(the state of poor acid), so the reliability of high temperature operation or overcharge is low, and the battery will be "dry".

　　(3) The liquid electrolyte is different due to the sedimentation (the acid layer, and the acid layer is irreversible). Therefore, the response is uneven. Internal short circuit.

　　(4) The proportion of acid liquid is high, (1.33), and the corrosion of the pole plate itself is relatively large

Read recommendations:

lithium marine batteries direct sales

12v 100ah lithium ion battery

76.8V 48Ah LiFePO4 Battery for Electric Motorcycles Scooter Tricycle Rickshaw

LiFePO4 18650 Batteries: The Powerhouse Built for Lasting Safety in Industrial Settings

Introduction to low temperature battery