UAV intelligent battery knowledge popularization

　　The reason why smart batteries are called smart batteries, not only the LED power instructions can be called smart batteries. There are mainly the following differences between smart batteries and non -smart batteries.

　　1. View battery information

　　Non -smart batteries: Only third -party modules can be collected to collect internal voltage, and when the model friends operate the drone, they can only use the battery voltage to judge the length of the battery power supply.

　　Smart battery: In addition to judging the battery's power through LED lights, the internal information of the battery can be introduced to the APP software through the protocol port to observe the battery information in time, such as the real capacity of the battery. The number of cycles, the number of places, and so on. These data will be stored in the memory chip by the intelligent management board inside. The battery information transmitted by the player through the mobile app can master all the data of the battery at a glance.

　　2. Protection function

　　Non -smart batteries: The appearance of the previous B6 charger was because the battery itself did not charge and the balance function, so as to control the battery to prevent the battery overwhelming.

　　Intelligent battery: The intelligent management board is a protective wall of the battery cell itself. The intelligent management board of the smart battery will automatically detect the battery voltage. Once the safety range is exceeded, he will automatically cut off the current. While charging, the intelligent management version will also be charged. At the same time, when the mold is operated, the management version will immediately send an alarm information to the receiving terminal once a low voltage occurs, indicating that the voltage is insufficient, and the information will be returned immediately.

　　3. Leisure protection

　　Non -smart batteries: Non -smart batteries need to regularly charge the battery after being idle to slow the decline in the performance of the battery.

　　Intelligent battery: The smart battery itself will detect its own situation. If the battery is detected without discharge within 10 days, the management board will start the dormant mode by itself to greatly reduce the self -consumption of the smart board. 65%of the power.

　　4. Self -examination function

　　Non -smart batteries: Non -intelligent battery intelligence can determine whether the battery is in normal health through human operation, universal meter measurement and other means.

Read recommendations:

lithium deep cycle marine battery sales

deep cycle marine battery

HB-S1200 1200W Waterproof IP54 Solar Portable Power Station Support Wireless Charge

Instruments and procedures for charging and discharging test of lithium-ion battery pack

How to repair lithium battery