Polymer lithium ion battery activation.lithium deep cycle marine battery Production

　　The question of whether the polymer lithium -ion battery activates has always been controversial. Some netizens think that general lithium -ion batteries do not need to activate. Assuming that the battery has been put on hold for too long, it can be charged for a few hours after charging. It will not work for more than 12 hours. The common sense that everyone knows is that the first three charging 12 hours is for the original nickel -cadmium battery. Lithium ion batteries are not, because lithium ion batteries have no memory effect. Experts said: Generally, it takes a period of small current to charge in the process. For the formation of the sei membrane of the electrode surface, this is certainly not completed by the charger of ordinary users. In the process, how can the producer be handed over to the user to complete it by themselves?

　　As a result, some users report: According to practical experience, lithium batteries need to be activated because the memory effect cannot be restored, but if the lithium battery is not activated, the problem of insufficient capacity can be recovered. Regardless of the standard lithium battery standard, it must be activated when enabled. When many users use lithium batteries, they do not scientifically activate, resulting in the best capacity of lithium batteries, and it is easy to make people mistakenly think that this is a memory effect.

　　Generally, the battery has the following activation process:

　　Activation process 1: The lithium batteries just used generally have the remaining power. Do not charge at this time. The battery is used in the normal use until the power is low until it is completely unable to turn on.

　　Activation process 2: For the first charging, it is best to use the original charger to charge, and it is better to shut down. Many people do not shut down and charge. This is not conducive to activating the capacity of lithium battery. And remind everyone that it is necessary to charge for more than 12 hours and less than 15 hours. If the prompt is full, don't pull it out, let it keep the charging state!

　　Activation process 3: After the first full charging, if it is used normally until it cannot be turned on. You can continue to operate in the process 2!

　　Activity process 4: completely discharge, completely charging (that is, repeat process two and process three) repeated three times. At this time, the battery is successful and can reach the best capacity state.

　　The precautions are: Lithium batteries are often activated when they leave the factory, so buyers do not need to activate it again. It is recommended not to use universal charger if the activation period. If you reach the normal period of use, you can use universal charger. Because the original charger is the most suitable. Universal charger, the stability of the current is not necessarily consistent with the voltage of the lithium battery, which is likely to accelerate the aging of lithium battery.

Read recommendations:

solar energy storage Factory

lithium boat batteries

12V 150Ah 200Ah LiFePo4 Motive Battery Pack for Clean Car Electric Vehicle

Positive overcharge reaction.deep cycle marine battery Processing.solar batteries for home manufacturer

Battery knowledge